The IEEE 1394 (FireWire) standard is often compared to USB. |
IEEE 1394, USB, IEEE 1394, USB, IEEE 1394 |
Which of the following standards provides for data transfer rates up to 800 Mpbs with a maximum cable length of 100 meters? |
IEEE 1394b |
How many devices does a single IEEE 1394 bus support? |
63 |
What is the maximum cable length for the IEEE 1394a standard? |
4.5 meters |
What is the maximum data transfer rate of an IEEE 1394a device? |
400 Mbps |
Which IEEE version supports peer-to-peer transmission of data? |
1394.3 |
Which of the following components is necessary to keep the real-time clock running? |
CMOS battery |
Which of the following components is a non-volatile memory technology for saving system settings when the computer is powered off? |
EEPROM chips |
Which of the following components is an example of firmware? |
BIOS/UEFI |
Which of the following is a general term for the program that holds system information related to the starting of a computer? |
CMOS |
What is the role of the CMOS in a modern computer? |
Saves information about the system devices |
Which of the following could be detrimental while flashing the BIOS? |
Loss of power |
Which of the following situations is most likely to require a system BIOS update? |
You are upgrading a processor |
When do you need to upgrade the system BIOS? |
Whenever a BIOS update provides functionality that is not currently supported buy that is required by the operating system of hardware |
When you boot the computer, it hangs after asking you for the current time and date. |
The CMOS battery has failed |
What is the name for the routine that tests the motherboard, memory, disk controllers, video, keyboard and other system hardware? |
POST |
What technology was designed to replace the BIOS and is a firmware solution for controlling the startup process and loading the computer operating system into memory? |
UEFI |
Which of the following are improvements over BIOS that are provided by UEFI? |
Supports drives larger than 2.2 TB, Supports 64-bit firmware device drivers, Faster startup times |
For a special project, you have been asked to recommend that lowest profile desktop computers available. You are attempting to put together the specifications for these machines. |
Riser |
Which of the following expansion buses are most commonly used for vides cards in modern computer systems? |
PCI Express |
Which of the following expansion buses is most commonly used for devices such as sound cards, modems, and network cards? |
PCI |
Which expansion bus is best for high-speed, high-resolution, three-dimensional graphics? |
PCIe |
You are installing and updated driver for a hardware device on your system. |
The driver has been tested by Microsoft, The driver file has not been altered |
You have a legacy non-Plug-andPlay device that must be installed under Windows. |
Device Manager |
Which of the following terms describes a PC card that you can insert and remove without rebooting the computer? |
Hot-swappable |
Which of the following expansion buses in most commonly used for devics such as sound cards, modems, and network cards? |
PCI |
Which expansion bus is best for high-speed, high-resolution, three-dimensional graphics? |
PCIe |
You want to build a computer that can stand upright on a desk and takes up the least amount of space possible. |
Micro-ATX slim tower |
Which of the following form factors does not have expansion slots on the motherboard, but instead uses a riser card for expansion cards? |
NLX |
You decided to upgrade your PC with a faster processor. |
Use the Mini-ATX motherboard in the ATX case |
You need to purchase a case that meets the following criteria: Compatible with most form factors, at least two external and internal bays |
ATX mid-tower |
Which motherboard form factor allows for low-consumption power supplies? |
Mini-ITX |
Use the above diagram to match the case type |
Mini-ITX Tower, Micro-ATX Slim Tower, Micro-ATX Tower, ATX Mid-Tower, ATX Full-Tower |
Which of the following processor features is used to dynamically reduce power consumption based on current operating conditions? |
Throttling |
Where should the thermal paste go when installing a processor? |
Between the heat sink and CPU |
Which of the following actions is not recommended for keeping your computer cool? |
Remove unused expansion card slot covers |
You have a system that has been overheating. Which of the following actions will not help to keep the system cool? |
Removing the case side panel |
What is the correct order for installing a processor for proper cooling? |
CPU, thermal paste, heat sink, fan |
Which of the following accurately describes case fans? |
Pull cool air from the front and blow hot air out the back, Create a pressurized system inside the case |
Which of the following will ensure optimal system cooling? |
Keep the ambient temp below 80, leave space between the case and any walls or obstructions, Bundle cables together and secure unused cables to the case |
Which of the following characteristics accurately describe passive heat sinks? |
More reliable than active heat sinks |
Which of the following thermal solutions might you find on memory modules? Passive heat sink |
… |
Match the cooling system types on the left with the appropriate characteristics and uses on the right. |
Active heat sink, Liquid cooling, Active heat sink, Active heat sink, Power supply, Passive heat sink, Liquid cooling, Passive heat sink |
To which of the following objects should thermal paste be applied? |
CPU |
Which of the following devices would you add to a computer if you needed to take inventory at a retail store by scanning the UPC symbols on products? |
Bar Code reader |
You have three computers in your office. |
KVM |
Which of the following is considered an input devices? |
Touchscreen |
What type of peripheral device is typically found on a notebook computer and allows the user to control the cursor with a finger? |
Touch pad |
Match the peripheral devices on the left with the descriptions or examples on the right. |
Smart card reader, Digitizer, Smart card reader, Biometric scanner, Digitizer, Biometric scanner, Barcode reader |
You recently installed a fiber-optic network board in an expansion slot in your system’s motherboard. |
Driver |
You have just finished installing Windows on a system that contains four physical hard disks. |
Unallocated |
Match the disk status on the left with the corresponding description on the right. |
Initializing, Healthy, Unavailable, Offline |
You have a DVD-ROM disc with no label and you want to know if it has any important files on it. |
No Media |
You have four volumes on a basic hard disk. |
Healthy (Logical Drive) |
You have four volumes on a basic hard disk. You convert the disk to dynamic. |
Healthy |
You have a disk in you system that is displayed in the Disk management utility as shown in the image below. |
Not Initialized |
What is the difference between UXGA and WUXGA displays? |
WUXGA has a widescreen aspect ratio |
Which of the following are true of the SXGA screen resolution? |
5:4 aspect ratio, 1280 x 1024 |
Which of the following terms describes the difference between white and black in an LCD monitor? |
Contrast ratio |
You have purchases a 1600 x 1200 LCD monitor and connected it to the DVI-I port on your computer using a DVI-D cable. |
Change the screen resolution to the native resolution of the monitor |
Which of the following video card connectors provides digital video output? |
DVI-D, HDMI |
How many pins are on a VGA connector? |
D-shaped with 15 pins |
Which of the following statements are true about the DisplayPort interface for connecting video monitor to computers? |
DisplayPort can send both video and audio signals over the same cable, DisplayPort uses a lower voltage that DVI or HDMI |
Which of the following is true of moden LCD monitors regarding backlighting? |
LEDs are used to backlight the screen |
You are putting together a gaming system and need to make sure you get a display that meets your needs. |
LCD display with TN panel |
You are putting together a system for a graphic artist and need to make sure you get a display that meets her needs. |
LCD display with IPS panel |
You have a friend who is offering to sell the monitor and video card from his gaming system along with several PC games. |
Buy your friend’s games, monitor, and video card. Swap out both you video card and monitor. |
Select the aspect ratio that applies to the display types listed. |
4:3, 16:10, 16:9 |
You are looking at a femal TRS connector on the computer. |
Speaker |
You purchased a new LED monitor for your computer |
DisplayPort cable |
You are connecting an older, dot matris printer to a computer. |
Parallel port |
You are providing telephone support for a user who is trying to connect a computer to a projector. |
D-shaped with 15 pins |
Consider the external ports for a typical PC system |
HDMI, Thunderbolt, IEEE 1394, USB, VGA, DVI, RJ45, RJ11, Fiber S/PDIF, Audio Jack |
Consider the cable connectors used by various peripheral devices |
External Storage Device G, Analog Monitor D, Video Camera C, HDTV A, Dial-up Modem H, Digital Monitor (without audio) E, Network Adapter F, Headphones B |
Which of the following are considered computer hardware? |
Printer, Motherboard |
Which compiuter function takes data through a series of procedures as defined by a set of instructions? |
Processing |
You need to replace a broken monitor on a desktop system. You decide to replace it with a spare monitor that wasn’t being used. |
Standardization |
Which of the following are considered input devices? |
Scanner, Keyboard, Microphone |
Drag the computer function of the left with its associated hardware component on the right |
Hard disk – Storage, Printer – Output, Keyboard – Input, CPU – Processing, Speakers – Output, RAM – Processing, DVD-RW – Storage, Microphone – Input |
Which connector on the back of a computer is used to attach a mouse to a modem PC system? |
USB A |
You are looking at a high-density(three-row) female DB-15 connector on the computer as shown in the figure below. What device uses this connector? |
VGA/SVGA monitors |
You are helping a customer over the phone who needs to connect a monitor that uses a digital interface. |
DVI |
You have been tasked with designing a workstation that will run Vmware Workstation virtualization software. |
RAM configured to run in quad-channel mode, 64-bit processor with 8 cores |
You want to purchase a home theater computer system. |
HTPC form factor, Video card with HDMI output |
You are purchasing a PC system that will be used as a file and print server in a small business. |
RAID 1+0 array, 64-bit multi-core processor |
You are purchasing several PC system that will be used as thin clients in a large organization. |
Gigabit Ethernet adapter |
You own a custom PC retail store. A small business client ask you to build three workstations for her organization. |
Thin Client PC – Intel Celeron, Video Editing Workstation – Intel Core i7, Virtualization on Workstation – AMD |
You are a PC technician for a national computer retailer. |
Home Office Server – 2 TB, Gaming PC – 1000 W power supply, Thick Client Workstation – 400 W power supply |
You are a PC technician for a national computer retailer. |
CAD/CAM – 2 GB, Virtualization Workstation – 32 G, Home Theater PC – HDMI |
You are a PC technician for a national computer retailer. |
Home officer server – 2 TB, Gaming PC – 1000 W power supply, Home Theater PC – HDMI, Virtualization Workstation – AMD, Thin Client Workstation – Intel Celeron, Audio/Video Editing Workstation |
You have installed a device in you system and have run the Add device wizard from the Control Panel. |
The device does not support plug and play |
Most devices that you install in a system require little to no configuration |
I/O address, IRQ, DMA channel |
Device manufacturers are constantly finding bugs, vulnerabilities, or better ways for their devices to communicate with the operating system. |
Obtain the latest driver from the manufacturer’s website before installing the device |
As a member of the help desk administration team you’ve been assigned to update the driver for the network adapter that is installed on most of the machines in your department. |
Device Manager |
For which type of device will you typically install the driver before you connect the device to your system? |
USB devices |
On a linux system, what is the name of the directory where you will find a text file called devices |
/proc |
Which of the following is true of most newer SATA drives? |
They can be added to or removed from a system without shutting down the computer |
Match the system resources on the left with the descriptions of examples on the right. |
I/O address, IRQ, DMA, IRQ, I/O |
Which of the following statements is true regarding single- and double-sided memory? |
Single-sided memory uses half the number of memory modules as double-sided memory of the same capacity |
Which of the following are true regarding a dual-channel memory bandwidth configuration? |
The memory controller must support dual-channels, Bandwidth is increased by 5-15% |
You have a computer with Pentium 4 CPU and two PC-2400 DDR modules. |
All memory will operate at 300 MHz |
You have a computer that has four DDR2 memory slots. |
3 GB |
You have an existing system that has a single DDR3 memory module installed. |
Purchase additional modules that are the same as what is currently installed, check the motherboard documentation to find which moduels are supported. |
You want to upgrade all memory in your system with the fastest memory available. |
Choose the type of memory that is suppoerted by your motherboard |
You want to build a new system that supports 6 GB of memory. |
64-bit processor |
Which of the following is the most common method for removing RAM from a motherboard? |
Move the tabs holding the RAM out of the way; pull straight up to remove the RAM |
What type of RAM might slow system performance because it holds memory addresses or data to improve stability on systems with more than 1 GB of RAM before it is transferred to the memory controller? |
Buffered |
With a memory module read request, there is a delay between the time of the data request and the time the data is available for output from the memory module |
CAS Latency |
You are in a carpeted office lighted by fluorescent bulbs. |
Electrostratic discharge (ESD) |
Which of the following motherboard power connectors typically connect directly to the motherboard? |
24-pin motherboard power, 4-pin CPU power |
Which of the following is an advantage of purchasing a motherboard with integrated graphics and audio? |
Lower overall system cost |
Which function does a motherboard’s chipset perform? |
Facilitates communication between the processor, memory, and peripheral devices. |
Which expansion slot is best for high-end dedicated video cards? |
PCIe x16 |
Match each of the motherboard components on the left with the appropriate description on the right. |
CMOS battery, Expansion slots, Southbridge, Flash memory, Northbridge, Non-volatile BIOS memory |
Consider the following diagram of a typical motherboard. |
PCI, PCIe x16, PCIe x1, Case fan power, CPU power, CPU, Memory, Power supply, SATA, Front/top panel, USB, IEEE 1394 |
Consider the expansion and memory slots highlighted on the motherboard diagram below. |
Image |
Consider the connectors highlighted on the motherboard diagram below. |
Image |
Consider the connectors highlighted on the motherboard diagram below. |
Image |
You are in the process of installing a motherboard in a system case. |
Standoffs |
Which of the following objects is installed between the system case and the motherboard’s back I/O ports? |
Faceplate |
Which of the following connectors are part of the system case and connect to header pins on the motherboard? |
Power switch, HDD LED activity |
You have a computer system with a dual-core processor. |
Read the motherboard documentation to identify which processors are supported. |
Upon reviewing the specifications for a motherboard, you find that it uses a 1155 CPU socket. |
Intel |
Upon reviewing the specifications for a motherboard, you find that it uses an F CPU socket. |
AMD |
Match each CPU socket on the left with the appropriate CPU it is designed to support on the right. |
775, AM3+, 1366, FM1, 775, 1366, AM3+ |
A user calls to complain that her computer is behaving erratically. |
Replace the motherboard |
Which of the following will most likely contain SODIMM memory? |
Notebook computers |
Which of the following is an upgrade to SODIMM standard? |
UniDIMM |
Which of the following are terms used to identify memory modules? |
DIMM |
What is the approximate bus speed of DDR2 memory rated at PC2-5300? |
333 MHz |
Which of the following memory ratings identifies the fastest memory? |
DDR3-1600 |
Which memory rating identifies the fastest memory? |
DDR3-2000 |
Assuming the same operating frequency, what are the advantages of DDR3 over DDR2? |
DDR3 doubles the data transfer rate of DDR2, DDR3 uses less power than DDR2 |
Assuming the same operating frequency, what are the advantages of DDR4 over DDR3? |
DDR4 uses less power than DDR3, DDR4 doubles the data transfer rate of DDR3 |
Your motherboard has sockets for 184-pin DIMM RAM. Which type of RAM should you install? |
DDR |
What is the theoretical capacity of a DDR4 standard system memory module? |
512 GB |
A customer needs to use several applications. |
Memory |
Consider the memory modules shown in the image below. |
DDR, DDR3, DDR4, DDR2, 200-pin SODIMM, 144-pin SODIMM, UniDIMM |
You have a CD-RW drive that advertises speeds of 32x/12x/48x. What is the read speed of the drive? |
48x |
Which optical media has the greatest storage capacity? |
Single-layer, single-sided Blu-ray disc |
Which Blu-ray standard defines rewritable disks? |
BD-RE |
Which of the following are optical storage devices? |
DVD, CD, BD |
Match the labels on the left with the characteristics listed on the right |
Compact Disk (CD), Compact Disk (CD), Digital Versatile Disc (DVD), Digital Versatile Disc (DVD), Blu-ray Disc (BD), Blu-ray Disc (BD) |
Which of the following are printer languages? |
Escape codes, PostScript, PCL |
You’ve just set up a color laser printer on a customer’s Window workstation. |
Edit the printer, Verify that it is working |
You have just set up a new laser printer for the company president on her Windows workstation. |
Edit the printer properties to configure device-specific settings. |
Which of the following allows a compuer to communicate with a printer? |
Print driver |
Which of the following virtual printing options allows you to convert a word document into a .jpg file? |
Print to Image |
You’re responsible for ordering consumables for your organization’s printers. |
Toner cartridges recommended by the printer manufacturer. |
Which of the following problems is common for dot matrix printers? |
Paper scraps are caught in the feed mechanism |
you replaced the print cartridge on an inkjet printer. |
Calibrate the printer |
You installed a new toner cartridge in a company-owned laser printer and did some maintenance tasks you noticed that needed to be done. |
Reset the Page count |
You’re conducting scheduled maintenance on a laser printer. |
Use an anti-static vaccuum. |
You replaced the ink cartridges in a color inkjet printer. |
Printer cartridge calibration |
Why would you recommend a dye sublimation printer? |
When print jobs are detailed photographic reproductions. |
Which of the following would be a good reason to not recommend a solid ink printer? |
The user has a surplus of toner cartridges and would like a printer that can be used with these. |
Which of the following printers would produce the highest print quality? |
600 DPI |
Which type of printer uses an inked ribbon? |
Dot matrix |
Which type of printer has the poorest print quality because the image is created using fairly large dots? |
Dot matrix |
Need to look up |
… |
Which type of printer heats the ink in its print head to print? |
Bubble jet (inkjet) |
You have been asked to recomment a printer that will be used in a travel agency. |
Impact |
Which of the following components are found in dot matrix printers? |
Platen, Tractor feed |
Which type of printer uses a drim, plastic toner, and fuser to create a printed page? |
Laser |
Which type of printer uses lasers and electrical charges to transfer image to paper? |
Laser |
Which component in a laser printer prepares the photosensitive drum for writing by causing it to receive a negative electrostatic charge? |
Primary corona |
Which component is a laser printer charges the paper to attract toner? |
Transfer roller |
Which component in a laser printer applies toner to the drum, causing the toner to stick to the charged area on the drum? |
Developing roller |
Which term refers to the portion of the hard drive where print jobs are stored before going to the print device? |
Print queue |
What is a ZIF socket? |
A special socket for inserting and securing a processor |
What is the purpose of cache memory? |
Allows a processor to access data more quickly |
Which feature on Intel chips allows a single processor to run two threads in parallel, instead of processing single threads linearly? |
Hyper-threading |
You have an AMD processor and an Intel processor, both of which have the same speed rating. |
Performance will depend on other factors such as cache and other features. |
Which of the following refers to placing two processors on a single processor chip or die? |
Multi-core |
What is true of processor cache? |
L1 is typically unique to processor core, L3 is shared between all cores |
What is the biggest advantage of 64-bit processors over 32-bit processors? |
The ability to use over 4 GB of memory |
Which of the following is a characteristic of a multi-processor system? |
Multiple processor sockets on the motherboard |
Which of the following statements are true? |
32-bit processors use only the IA-32 instruction set (also referred to as x86), 64-bit processors use the x86-64 instruction set (also referred to as x64) |
You have a computer system with an Intel Core i3 |
Read the motherboard documentation to identify which processors are supported. |
You would like to upgrade the processor in your system to a 64-bit processor. |
Operating system |
You want to add a second processor to your dual-processor system |
Match the speed to the new processor with the speed of the existing processor |
Your computer has one single core processor installed |
Replace the existing processor |
You have a computer with a dual core 64-bit processor that uses the x86-x64 instruction set. |
Install the application normally |
You test installing a second CPU. You remove the terminating resistor from the second CPU slot |
Replace the terminating resistor in the slot that was occupied by the second CPU. |
Assuming all other processor specifications are the same, which of the following processor sizes will consume the least amount of power? |
32 nm |
You have a desktop computer that you want to upgrade. You add several internal components and external components. |
Watt rating |
You have a laptop with a dual core processor with the following characteristics: 1024 MB L2 cache, 125 watts |
90 Watts |
You need to replace the power supply in your home desktop computer. |
form factor, output wattage, processor connector |
You are building a new computer from both new and used parts. |
Use an adapter cable to connect two 4-pin Molex connectors to the 8-pin PCIe connector |
Which of the following components converts AC to DC? |
Power supply |
Which of the following voltage are provided by an ATX power supply |
3.3, 5, 12 |
Which of the following statements are true regarding power supply wattage? |
The wattage requirement for each individual circuit uses formule w = v x a, The watt rating indicates how much power can be supplied to various devices. |
Your company relocated you to their United Kingdom officer in London. |
Toggle the voltage switch on the power supply to the different voltage. |
You have a motherboard that uses a 24-pin ATX connector |
A power supply with a 20-pin ATX and a +4-pin connector, A power supply with a 24-pin ATX connector only |
Which of the following functions does and ATX power supply perform? |
Aids in thermal management, converts ac to dc |
Which of the following devices uses the 4-pin peripheralk (Molex) connector? |
PATA CD-ROM, Case fan |
You need to replace the power supply in your home desktop computer. Which of the following specifications are the mostly likely to affect your power supply choice? |
Form factor, output wattage, Type and number of connectors |
You are testing the power supply in a PC system by measuring the voltage available on the 4-pin Molex connector. |
Nothing, the power supply is working normally |
You are testing the power supply in a PC system by measuring the voltage available on the 4-pin Molex connector. The voltage on the yellow wire is +10.1 volts. |
Replace the power supply |
To test a power supply, you want to use a multimeter to measure the voltage on a molex hard disk drive connector. |
Pins 15 and 16, Pins 16 and 17 |
You have a desktop computer that uses a 250 watt power supply. You recently added a 4-disk RAID 10 array to the system and now it spontaneously shuts down. |
Upgrade to a power supply that provides more watts. |
Which power supply featur helps prevent circuit overloads by balancing the current flow? |
Dual rail |
You are trying to troubleshoot a power supply issue with a voltmeter. |
plus minus 12v, plus minus 5v |
You are servicing a client’s computer that has been randomly restarting. |
The power supply is failing and should be replaced. |
You want to use a multimeter to test a power supply’s voltage. |
Pins 15 and 16, Pins 16 and 17 |
An employee submitted a support ticket stating that her computer will not turn on. |
Make sure the power cord is pluegged into the wall, Make sure the surge protector is turned on. |
What is an advantage of RAID 5 over RAID 1? |
… |
You have been asked to implement a RAID 5 solution for an engineer’s desktop workstation. What ins the minimum number of hard disks that can be used to configure RAID 5? |
3 |
Which of the following drive configurations uses striping without fault tolerance? |
RAID 0 |
You have a computer with three hard disks. A RAID 0 volume uses space on Disk 1 and Disk 2. A RAID 1 volumes uses space on Disk 2 and Disk 3. Disk 2 failes. Which of the following is true? |
Data on the RAID 1 volume is accessible; data on RAID 0 volume is not. |
Which RAID configuration level provides increased performance using only two disks? |
RAID 0 |
You are configuring a new system and want to use a RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. |
Load the RAID drivers during operating system installation |
Your computer currently runs Windows 7 Enterprise edition. You want to create a RAID 5 array using three newly-installed SATA disks. When you go to Disk Managemenr, the option to create the RAID 5 array is not available. |
Install an add-on RAID controller |
You have an existing computer running windows 7 enterprise. You want to configure a RAID 1 array in the computer. |
Install the drivers for the RAID controller |
You have been asked to implement a RAID 10 solution for a video editor’s desktop workstation. |
4 |
Which of the following drive configurations uses striping with fault tolerance? |
RAID 5 |
You have a motherboard with 4 built-in SATA connectors. |
4 |
A manager wants you to install a Serial ATA hard drive into his compuer, but the motherboard does not have a serial ATA connector. |
Install a Serial ATA host adapter in an expansion slot |
Which of the following tasks would you complete as part of a SATA installation? |
Plug the 15-pin power connector into the SATA drive |
Which of the following is the most common disk interface used for optical drives on home and office computers? |
SATA |
Which interface is primarily used for internal hard drives in modern desktop PC Systems? |
SATA |
Which generation of SATA storage devices does the following? |
SATA3 |
Which SATA storage device standard does the following? Integrates data and device power into a single cable, Uses a connector and port that are neither L-shaped nor rectangular |
eSATAp |
You recently purchases a new sound card and installed it in a free PCI slot in your computer. |
Check the vendor’s web site for an updated driver |
You would like to install windows on a computer that previously had another operating system installed on it, but you are not sure if the audio card is compatible. |
Check the manufacturer website for compatibility information |
You have just purchased a new plug-and-play sound card that uses a PCI slot. |
Check the HCL to make sure the device is compatible with the version of windows running on your system, Download the latest driver from the manufacturer’s web site. |
What is a DB-15 connector on a sound card typically used for? |
Joystick, MIDI port |
Which port on a sound card should you connect a non-amplified microphone to? |
Mic In |
Which of the following features are typically available through TRS ports on a sound card? |
Microphone in, Speaker out |
You want to purchase a motherboard that has integrated sound with digital audio output. |
S/PDIF |
You are building one of your customers a home theater PC (HTPC) to connecto to an HDTV and high-definition audio system. |
Dolby Digital, DTS support, or SDDS support, S/PDIF output |
Which component is responsible for converting digital audio into sound that can be played on speakers? |
DAC |
What method does an SDHC card use for storing data? |
Reprogrammable memory |
Which storage device uses aluminum platters for storing data? |
Hard disk |
Which of the following is typically used for large data backups of servers? |
DLT tape |
You need a storage device that has very large storage capacity, is fast, and is relatively inexpensive. |
Hard Disk |
Which of the following are advantages of solid state storage compared to hard drives? |
No moving parts, Lower power requirements |
Which of the following is not an advantage of SSDs over HDDs? |
Inexpensive |
What method does an eMMC card use for storing data? |
Non-volatile memory chips |
Which of the following are magnetic storage devices? |
Tape drive, Hard disk |
Match the storage device types on the left with the description and benefits on the right. |
Hard disk drive, Solid state drive, Optical disc, Hard disk drive, Solid state drive, optical disc |
Which tool would be the best choice to remove and replace the motherboard BIOS chip? |
IC extractor |
You are removing screws within a computer, but several have fallen into places you can’t reach. |
Extension magnet |
You plug a USB 2.0 external storage device into a USB 3.0 port on your computer. |
The device will work, but will only transfer at USB 2.0 speeds. |
Which of the following devices typically use a microUSB connector? |
smartphones |
You need to connect a new USB scanner to the USB port on your computer. |
Install the scanner drivers, then connect the scanner to the USB port and complete the Add a Device wizard when it pops up |
Which is the most common interface for peripheral devices? |
USB |
Which of the following standards provides for data transfer rates up to 480 Mbps with a maximum cable length of 5 meters? |
USB 2.0 |
What is the maximum data transfer speed for USB 3.0 devices? |
5 Gbps |
What type of USB 3.0 connector is shown here? |
Type-A |
What type of USB 2.0 connector is shown here? |
MicroUSB |
Match the USB connector types on the left with the image labels on the right. |
1 – USB 3.0 Type-A, 2 – USB 3.0 Micro-B, 3 – USB 3.0 Type-B, 4 – USB 2.0 Type-A |
Match the USB connector types on the left with the image labels on the right. |
1 – USB 2.0 Type-B, 2 – microUSB, 3 – miniUSB, 4 – USB 3.0 Micro-B |
Which of the following expansion buses are most commonly used for video cards in modern computer systems? |
PCI Express |
You are in the process of building a new computer. |
Purchase two identical video cards. |
You are in the process of building a new computer. You would like to configure your computer to use SLI to improve |
Connect at least on monitor to the graphics card, Purchase a motherboard with two PCIe x16 slots, Purchase tow graphics cards with SLI and similar specifications. |
You are installing a High-end PCIe x16 video card in a new computer. |
Connect a 6- or 8-pin power connector to the video card. |
A customer wants to add an additional video card to her computer so she can play the latest conputer games. |
The motherboard should support either SLI or Crossfire, For the best performance, both video cards should be identical |
You want to be able to watch and record live TV on your computer. |
Purchase a card that supports ATSC, Connect the TV input to the tuner card coaxial cable and F-type connectors. |
You’ve just installed a new video card in a employee’s window workstation. |
Download and install the latest driver from the video card manufacturer’s website. |
You are building an HTPC (home theater PC) that will be connected to an HDTV. |
HDCP |
Match the video card types on the left with the appropriate characteristics on the right. |
Dedicated video cards, dedicated video cards, dedicated video cards, integrated video cards, intergrated video cards, integrated video cards. |
Your company has decided to hire a full-time video editor. |
Resolution, Refresh rate |
You need to connect a monitor that provides an HDMI port and a VGA port to a video adapter in a PC system that uses a DVI-D connector. |
Use an adapter to connect the monitor HDMI port to the DVI-D connector on the PC. |
CompTIA A+ – Hardware
Share This
Unfinished tasks keep piling up?
Let us complete them for you. Quickly and professionally.
Check Price