|
You are building a wireless network within and between two buildings. The buildings are separated by more then 3000 feet. The wireless network should meet the following requirements…. |
Building 1-location A Right-facing directional Antenna/WPA2 with CCMP Building 1-location B Omni directional Antenna/WPA2 with CCMP Building 1-location C Left-facing directional Antenna/WPA2 with CCMP Building 1-location D Right-Facing Parabolic Antenna/WPA2 with CCMP Building 2-location A Omni Directional/WEP with Open authentication Building 2-location B Left-facing Parabolic Antenna/WPA2 with CCMP |
|
Your wireless network consist of multiple wireless 802.11n access points that are configured as follows…..This network is required to support an ever-increasing number of devices. what should you do? |
Double the bandwidth assigned per channel to 40MHz |
|
What purpose does a wireless site survey serve? select two |
To Identify existing or potential sources of interference To identify the coverage area and preferred placement of access points. |
|
You are designing a wireless network for a client. Your client needs the network to support data rate of at least 150Mbps. In addition, the client already has a wireless telephone system installed that operates 2.4GHz. Which 802.11 standard will work best in this situation? |
802.11n |
|
You are designing a wireless network for a client. Your client needs the network to support a data rate of at least 54Mbps. Which 802.11 standard will work best in this situation? select two |
802.11n 802.11a |
|
You are designing an update to your clients wireless network. The existing wireless network uses 802.11g equipment, which your client complains runs to slowly. She wants to upgrade the network to run 150Mbps or faster. Which 802.11 standard will work best in this situation. |
802.11n |
|
You have been hired to design a wireless network for a SOHO environment. Which of the following questions should you ask? select three |
How many devices will need to be supported Is the business expected to grow in size in the future What type of data will be transmitted on the network |
|
To optimize your network, you want to configure your wireless AP to use a channel that meets the following criteria. non-overlapping, low utilization, low interference. |
channel 1 |
|
Match each wireless term or concept on the left with its associated description on the right |
Compares the level of the WIFI signal to the level of background radio signals/ Signal to Noise ratio Checks channel utilization and identifies sources of RF inference/ Spectrum analysis Identifies how strong a radio signal is at the receiver/Received Signal Level Identifies the number of useful bits delivered from the senders to the receiver/ Causes multiple copies of the same radio signal to be received by the receiving antenna/ Bounce Degrades wireless network performance/ Device saturation |
Share This
Flashcard
