|
You want to connect the LAN port on a router to the uplink port on a switch. The switch does not support auto-DMI. Which type of cable should you use? |
Crossover. |
|
You have two switches that you need to connect using their uplink ports. The switches do not support auto-DMI. Which type of cable should you use? |
Crossover. |
|
Which of the following connectors is typically used on one end of a rollover cable? |
Serial. |
|
You need to connect a workstation to a switch using a regular port on the switch (not an uplink port). The switch does not support auto-DMI. Which type of cable should you use? |
Straight-through. |
|
You need to transfer data from one laptop to another and would like to use an Ethernet cable. You do not have a hub or a switch. Which type of cable should you use? |
Crossover. |
|
You want to create a rollover cable that has an RJ-45 connector on both ends. How should you connect the wires within the connectors? |
Connect pin 1 to pin 8, pin 2 to pin 7, pin 3 to pin 6, pin 4 to pin 5. |
|
You have purchased a new router that you need to configure. You need to connect a workstation to the router’s console port to complete the configuration tasks. Which type of cable should you use? |
Rollover. |
|
Which of the following standards is typically used in a rollover cable? |
RS-232. |
Share This
Flashcard
