32 |
How many bits are in an IPv4 address? |
network portion |
Which two parts are components of an IPv4 address? (Choose two.) |
host address |
What does the IP address 172.17.4.250/24 represent? |
to determine the subnet to which the host belongs |
What is the purpose of the subnet mask in conjunction with an IP address? |
255.255.240.0 |
What subnet mask is represented by the slash notation /20? |
directed broadcast |
A message is sent to all hosts on a remote network. Which type of message is it? |
A single packet can be sent to a group of hosts. |
What are three characteristics of multicast transmission? (Choose three.) |
172.16.4.4 |
Which three IP addresses are private ? (Choose three.) |
dual stack |
Which two IPv4 to IPv6 transition techniques manage the interconnection of IPv6 domains? (Choose two.) |
3FFE : 1044 : 0 : 0 : AB :: 57 |
Which of these addresses is the shortest abbreviation for the IP address: 3FFE : 1044 : 0000 : 0000 : 00AB : 0000 : 0000 : 0057? |
link-local |
What type of address is automatically assigned to an interface when IPv6 is enabled on that interface? |
loopback |
What are two types of IPv6 unicast addresses? (Choose two.) |
a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP. |
What are three parts of an IPv6 global unicast address? (Choose three.) |
stateless DHCPv6 |
An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured? |
ICMPv6 |
Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host? |
the average time it takes a packet to reach the destination and for the response to return to the source the destination device is reachable through the network |
Which two things can be determined by using the ping command? (Choose two.) |
to provide feedback of IP packet transmissions |
What is the purpose of ICMP messages? |
IP is properly installed on the host. |
What is indicated by a successful ping to the ::1 IPv6 address? |
when the value in the TTL field reaches zero |
A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet? |
Hop Limit field |
What field content is used by ICMPv6 to determine that a packet has expired? |
149 |
The decimal equivalent of the binary number 10010101 is |
11101000 |
The binary equivalent of the decimal number 232 is |
63 |
What is the decimal equivalent of the hex number 0x3F? |
Chapter 7 cisco
Share This
Unfinished tasks keep piling up?
Let us complete them for you. Quickly and professionally.
Check Price