PC Pro 2.3.3 Practice Questions

You need to trace the route that a Cat 6 UTP cable takes through the ceiling and walls of your building. Which tool should you use?

A. Tone generator
B. Cable tester
C. Multimeter
D. Loopback plug

Tone generator

What are loopback plugs used for?

A. Removing broken pins from within sockets
B. Grabbing and lifting small objects
C. Connecting computers together without using network cards or modems
D. Testing ports by returning output signals as input

Testing ports by returning output signals as input

Which tool would you use to grab and lift small objects?

A. Cable tester
B. Multimeter
C. 3-prong holder
D. IC extractor

3-prong holder

Which tool would you use to measure electrical properties such as voltage, amps, and resistance?

A. Cable tester
B. IC extractor
C. Mini electronic combination wrench set
D. Multimeter

Multimeter

A printer is behaving erratically and you suspect a faulty parallel port. Which tool can you use to test the parallel port?

A. Cable tester
B. Ammeter
C. Multimeter
D. Loopback plug

Loopback plug

You suspect that the power supply in your desktop PC is failing. You want to use a multimeter to test the power supply. Which multimeter setting should you use?

A. Ohms
B. AC volts
C. Watts
D. DC volts

DC volts

Which of the following tools is specifically designed to test the DC voltage on a hard disk drive power connector?

A. Cable tester
B. Power supply tester
C. Loopback plug
D. Multimeter

Power supply tester

Your workstation is unable to communicate with any other computer on the network. Which of the following tools should you use to test the ability of the network card to send and receive signals?

A. Ohmmeter
B. Cable tester
C. Multimeter
D. Loopback plug

Loopback plug

Which tool would be the best choice to remove and replace the motherboard BIOS chip?

A. IC extractor
B. Needle-nose pliers
C. Screwdriver
D. Combination ratchet

IC extractor

You are removing screws within a computer, but several have fallen into places you can't reach. Which tool would help retrieve the small screws?

A. IC extractor
B. Screwdriver
C. Needle-nose pliers
D. Extension magnet

Extension magnet

PC Pro 2.3.3 Practice Questions - Subjecto.com

PC Pro 2.3.3 Practice Questions

Your page rank:

Total word count: 359
Pages: 1

Calculate the Price

- -
275 words
Looking for Expert Opinion?
Let us have a look at your work and suggest how to improve it!
Get a Consultant

You need to trace the route that a Cat 6 UTP cable takes through the ceiling and walls of your building. Which tool should you use?

A. Tone generator
B. Cable tester
C. Multimeter
D. Loopback plug

Tone generator

What are loopback plugs used for?

A. Removing broken pins from within sockets
B. Grabbing and lifting small objects
C. Connecting computers together without using network cards or modems
D. Testing ports by returning output signals as input

Testing ports by returning output signals as input

Which tool would you use to grab and lift small objects?

A. Cable tester
B. Multimeter
C. 3-prong holder
D. IC extractor

3-prong holder

Which tool would you use to measure electrical properties such as voltage, amps, and resistance?

A. Cable tester
B. IC extractor
C. Mini electronic combination wrench set
D. Multimeter

Multimeter

A printer is behaving erratically and you suspect a faulty parallel port. Which tool can you use to test the parallel port?

A. Cable tester
B. Ammeter
C. Multimeter
D. Loopback plug

Loopback plug

You suspect that the power supply in your desktop PC is failing. You want to use a multimeter to test the power supply. Which multimeter setting should you use?

A. Ohms
B. AC volts
C. Watts
D. DC volts

DC volts

Which of the following tools is specifically designed to test the DC voltage on a hard disk drive power connector?

A. Cable tester
B. Power supply tester
C. Loopback plug
D. Multimeter

Power supply tester

Your workstation is unable to communicate with any other computer on the network. Which of the following tools should you use to test the ability of the network card to send and receive signals?

A. Ohmmeter
B. Cable tester
C. Multimeter
D. Loopback plug

Loopback plug

Which tool would be the best choice to remove and replace the motherboard BIOS chip?

A. IC extractor
B. Needle-nose pliers
C. Screwdriver
D. Combination ratchet

IC extractor

You are removing screws within a computer, but several have fallen into places you can’t reach. Which tool would help retrieve the small screws?

A. IC extractor
B. Screwdriver
C. Needle-nose pliers
D. Extension magnet

Extension magnet

Share This
Flashcard

More flashcards like this

NCLEX 10000 Integumentary Disorders

When assessing a client with partial-thickness burns over 60% of the body, which finding should the nurse report immediately? a) ...

Read more

NCLEX 300-NEURO

A client with amyotrophic lateral sclerosis (ALS) tells the nurse, "Sometimes I feel so frustrated. I can’t do anything without ...

Read more

NASM Flashcards

Which of the following is the process of getting oxygen from the environment to the tissues of the body? Diffusion ...

Read more

Unfinished tasks keep piling up?

Let us complete them for you. Quickly and professionally.

Check Price

Successful message
sending