linux+ chapter 6 quiz questions

Each SCSI device attached to a system must be assigned an ID number. What is this ID number called?

target ID

Most Parallel SCSI controllers are capable of supporting up to how many devices?

15

In a SCSI chain the highest priority SCSI device is given what SCSI ID?

7

What SCSI type supports speeds of up to 80 MB/second?

SCSI-3 Ultra2 Wide

If a Linux installation ends abnormally and the screen displays a fatal signal 11 error, what type of error has occurred?

segmentation fault

In some cases, the installation process fails to place a boot loader on the hard disk properly; this is often caused by hard drives with over what number of cylinders?

1024

To ensure that Linux has detected the correct amount of RAM in the system after installation, you should view the contents of what file in the proc directory?

/proc/meminfo

What file in the /proc directory contains a list of memory address ranges reserved for device use?

ioports

Select the file in the /proc directory that contains statistics on the performance of the processor:

loadavg

What file in the /proc directory contains information about a computer's CPU?​

/proc/cpuinfo

​Select the command that can be used to change the root filesystem to a different directory, such as when in a rescue environment.

chroot

You are troubleshooting an issue that occurs on a Linux system during the boot process. What file can be viewed on most Linux systems to see processes that started successfully or unsuccessfully specifically during the boot process?​

​/var/log/boot.log

What command is used to manage a software RAID configuration after installation?​

mdadm

What is the term for a ZFS managed filesystem that is created from ZFS pools?​

ZFS volume

​A ZFS volume that uses a variable stripe size and requires a minimum of three hard disks to protect against single disk failure is known as:

RAID-Z

What file under the proc directory contains information regarding what modules are currently loaded into the Linux kernel?​

modules

​In Fedora 20, the logging system used to record the messages normally stored within the boot.log, messages, and syslog files has been replaced by a journaling database system called?

journald

The first software RAID volume on a system will​ use a multiple disk device file that starts with what number?

127

In order to list all configuration parameters that can be modified for a subfilesystem, what command should be issued?​

zfs get all

​What RAID level is commonly referred to as disk striping with parity?

RAID5

linux+ chapter 6 quiz questions - Subjecto.com

linux+ chapter 6 quiz questions

Your page rank:

Total word count: 418
Pages: 2

Calculate the Price

- -
275 words
Looking for Expert Opinion?
Let us have a look at your work and suggest how to improve it!
Get a Consultant

Each SCSI device attached to a system must be assigned an ID number. What is this ID number called?

target ID

Most Parallel SCSI controllers are capable of supporting up to how many devices?

15

In a SCSI chain the highest priority SCSI device is given what SCSI ID?

7

What SCSI type supports speeds of up to 80 MB/second?

SCSI-3 Ultra2 Wide

If a Linux installation ends abnormally and the screen displays a fatal signal 11 error, what type of error has occurred?

segmentation fault

In some cases, the installation process fails to place a boot loader on the hard disk properly; this is often caused by hard drives with over what number of cylinders?

1024

To ensure that Linux has detected the correct amount of RAM in the system after installation, you should view the contents of what file in the proc directory?

/proc/meminfo

What file in the /proc directory contains a list of memory address ranges reserved for device use?

ioports

Select the file in the /proc directory that contains statistics on the performance of the processor:

loadavg

What file in the /proc directory contains information about a computer’s CPU?​

/proc/cpuinfo

​Select the command that can be used to change the root filesystem to a different directory, such as when in a rescue environment.

chroot

You are troubleshooting an issue that occurs on a Linux system during the boot process. What file can be viewed on most Linux systems to see processes that started successfully or unsuccessfully specifically during the boot process?​

​/var/log/boot.log

What command is used to manage a software RAID configuration after installation?​

mdadm

What is the term for a ZFS managed filesystem that is created from ZFS pools?​

ZFS volume

​A ZFS volume that uses a variable stripe size and requires a minimum of three hard disks to protect against single disk failure is known as:

RAID-Z

What file under the proc directory contains information regarding what modules are currently loaded into the Linux kernel?​

modules

​In Fedora 20, the logging system used to record the messages normally stored within the boot.log, messages, and syslog files has been replaced by a journaling database system called?

journald

The first software RAID volume on a system will​ use a multiple disk device file that starts with what number?

127

In order to list all configuration parameters that can be modified for a subfilesystem, what command should be issued?​

zfs get all

​What RAID level is commonly referred to as disk striping with parity?

RAID5

Share This
Flashcard

More flashcards like this

NCLEX 10000 Integumentary Disorders

When assessing a client with partial-thickness burns over 60% of the body, which finding should the nurse report immediately? a) ...

Read more

NCLEX 300-NEURO

A client with amyotrophic lateral sclerosis (ALS) tells the nurse, "Sometimes I feel so frustrated. I can’t do anything without ...

Read more

NASM Flashcards

Which of the following is the process of getting oxygen from the environment to the tissues of the body? Diffusion ...

Read more

Unfinished tasks keep piling up?

Let us complete them for you. Quickly and professionally.

Check Price

Successful message
sending