cisco chapter 5

What happens to runt frames received by a Cisco Ethernet switch?

The frame is dropped

What are the two sizes (minimum and maximum) of an Ethernet frame? (Choose two.)

64bytes-1518bytes

A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address?

It will send an ARP request for the MAC address of the default gateway

Which address or combination of addresses does a Layer 3 switch use to make forwarding decisions?

MAC and IP addresses

What are two potential network problems that can result from ARP operation? (Choose two.)

On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays.* Network attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.

Which two statements are correct about MAC and IP addresses during data transmission if NAT is not involved? (Choose two.)

Destination and source MAC addresses have local significance and change every time a frame goes from one LAN to another.* Destination IP addresses in a packet header remain constant along the entire path to a target host

What is the purpose of the preamble in an Ethernet frame?

is used for timing synchronization

A Layer 2 switch is used to switch incoming frames from a 1000BASE-T port to a port connected to a 100Base-T network. Which method of memory buffering would work best for this task?

shared memory buffering

Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.)

Logical link control is implemented in software. The data link layer uses LLC to communicate with the upper layers of the protocol suite.

What statement describes a characteristic of MAC addresses?

they must be globally unique

Which statement is true about MAC addresses?

The first three bytes are used by the vendor assigned OUI.

Which destination address is used in an ARP request frame?

FFFF.FFFF.FFFF

What addressing information is recorded by a switch to build its MAC address table?

the source Layer 2 address of incoming frames.

The exhiibit shows a small switched network and the contents of the MAC address table of the switch. PC1 has sent a frame addressed to PC3. What will the switch do with the frame?

The switch will forward the frame to all ports except port 4

Which switching method uses the CRC value in a frame

store and forward

What is auto-MDIX

a feature that detects Ethernet cable type

When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.

true

The ARP table in a switch maps which two types of address together?

Layer 3 address to a Layer 2 address

PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?

PC2 will send an ARP reply with its MAC address

A switch with a default configuration connects four hosts. The ARP table for host A is shown. What happens when host A wants to send an IP packet to host D?

Host A sens out a broadcast of FF:FF:FF:FF:FF:FF. Every other host connected to the switch receives the boradcast and host Dresponds with its MAC address.

The switches are in their default cofiguration. Host A needs to communicate with host D, but host A doesn not have the MAC address for its default gateway. Which network hosts will receive the ARP request sent by host A?

only hosts B, C, and router R1

Which statement describes the treatment of ARP requests on the local link?

They are received and rocessed by every device on the local network.

What are two potential network problems that can result from ARP operation?

On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays. Network attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.

A collision fragment, also known as a- frame, is a frame of fewer than 64 bytes in length.

RUNT

ARP- is a technique that is used to send fake ARP messages to other hosts in the LAN. The aim is to associate IP addresses to the wrong MAC addresses.

spoofing

On a Cisco switch,- memory buffering is used to buffer frames in queues linked to specific incoming and outgoing ports.

port-based

cut-through

has low latency may forward runt frames begins forwarding whent he destination address is recieved

store-and-forward

always stores the entire frame checks the CRC before forwarding checks the frame length before forwarding

What statements describes Ethernet?

it defines the most common LAN type in the world

cisco chapter 5 - Subjecto.com

cisco chapter 5

Your page rank:

Total word count: 802
Pages: 3

Calculate the Price

- -
275 words
Looking for Expert Opinion?
Let us have a look at your work and suggest how to improve it!
Get a Consultant

What happens to runt frames received by a Cisco Ethernet switch?

The frame is dropped

What are the two sizes (minimum and maximum) of an Ethernet frame? (Choose two.)

64bytes-1518bytes

A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address?

It will send an ARP request for the MAC address of the default gateway

Which address or combination of addresses does a Layer 3 switch use to make forwarding decisions?

MAC and IP addresses

What are two potential network problems that can result from ARP operation? (Choose two.)

On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays.* Network attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.

Which two statements are correct about MAC and IP addresses during data transmission if NAT is not involved? (Choose two.)

Destination and source MAC addresses have local significance and change every time a frame goes from one LAN to another.* Destination IP addresses in a packet header remain constant along the entire path to a target host

What is the purpose of the preamble in an Ethernet frame?

is used for timing synchronization

A Layer 2 switch is used to switch incoming frames from a 1000BASE-T port to a port connected to a 100Base-T network. Which method of memory buffering would work best for this task?

shared memory buffering

Which two statements describe features or functions of the logical link control sublayer in Ethernet standards? (Choose two.)

Logical link control is implemented in software. The data link layer uses LLC to communicate with the upper layers of the protocol suite.

What statement describes a characteristic of MAC addresses?

they must be globally unique

Which statement is true about MAC addresses?

The first three bytes are used by the vendor assigned OUI.

Which destination address is used in an ARP request frame?

FFFF.FFFF.FFFF

What addressing information is recorded by a switch to build its MAC address table?

the source Layer 2 address of incoming frames.

The exhiibit shows a small switched network and the contents of the MAC address table of the switch. PC1 has sent a frame addressed to PC3. What will the switch do with the frame?

The switch will forward the frame to all ports except port 4

Which switching method uses the CRC value in a frame

store and forward

What is auto-MDIX

a feature that detects Ethernet cable type

When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.

true

The ARP table in a switch maps which two types of address together?

Layer 3 address to a Layer 2 address

PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?

PC2 will send an ARP reply with its MAC address

A switch with a default configuration connects four hosts. The ARP table for host A is shown. What happens when host A wants to send an IP packet to host D?

Host A sens out a broadcast of FF:FF:FF:FF:FF:FF. Every other host connected to the switch receives the boradcast and host Dresponds with its MAC address.

The switches are in their default cofiguration. Host A needs to communicate with host D, but host A doesn not have the MAC address for its default gateway. Which network hosts will receive the ARP request sent by host A?

only hosts B, C, and router R1

Which statement describes the treatment of ARP requests on the local link?

They are received and rocessed by every device on the local network.

What are two potential network problems that can result from ARP operation?

On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays. Network attackers could manipulate MAC address and IP address mappings in ARP messages with the intent of intercepting network traffic.

A collision fragment, also known as a- frame, is a frame of fewer than 64 bytes in length.

RUNT

ARP- is a technique that is used to send fake ARP messages to other hosts in the LAN. The aim is to associate IP addresses to the wrong MAC addresses.

spoofing

On a Cisco switch,- memory buffering is used to buffer frames in queues linked to specific incoming and outgoing ports.

port-based

cut-through

has low latency may forward runt frames begins forwarding whent he destination address is recieved

store-and-forward

always stores the entire frame checks the CRC before forwarding checks the frame length before forwarding

What statements describes Ethernet?

it defines the most common LAN type in the world

Share This
Flashcard

More flashcards like this

NCLEX 10000 Integumentary Disorders

When assessing a client with partial-thickness burns over 60% of the body, which finding should the nurse report immediately? a) ...

Read more

NCLEX 300-NEURO

A client with amyotrophic lateral sclerosis (ALS) tells the nurse, "Sometimes I feel so frustrated. I can’t do anything without ...

Read more

NASM Flashcards

Which of the following is the process of getting oxygen from the environment to the tissues of the body? Diffusion ...

Read more

Unfinished tasks keep piling up?

Let us complete them for you. Quickly and professionally.

Check Price

Successful message
sending