Which of the following features on a wireless network allows or rejects client connections based on the hardware address? |
MAC address filtering |
Which of the following is used on a wireless network to identify the network name? |
SSID |
Which type of configuration would you see if you wanted to deploy 802.11n technology to communicate directly between two computers using a wireless connection? |
Ad hoc |
Which wireless standard can stream data at a rate of up to 54 Mbps using a frequency of 5 GHz? |
802.11a |
Which data transmission rate is defined by the IEEE 802.11b wireless standard |
11 Mbps |
You are designing a wireless network for a client. Your client needs the network to support a data rate of at least 150 Mbps. In addition, the client already has a wireless telephone system installed that operates 2.4 GHz. Which 802.11 standard will work best in this situation? |
802.11n |
Which IEEE wireless standards specify transmission speeds up to 54 Mbps? |
802.11g 802.11a |
Which of the following are characteristics of the 802.11g wireless standard? |
Backwards compatible with 802.11b devices Maximum bandwith of 54 Mbps Operates in the 2.4 GHz |
Which of the following is true when the DHCP setting is disabled in a wireless network? |
Wireless clients must use a static IP address within the correct IP address range to connect to the network. |
Which of the following locations will contribute the greatest amount of interference for a wireless access point? |
Near cordless phones Near backup generators |
You have been contacted by OsCorp to recommend a wireless Internet solution. The wireless strategy must support a transmission range of 150 feet, use a frequency range of 2.4 GHz, and provide the highest possible transmission speeds. Which of the following wireless solutions would you recommend? |
802.11n |
Which of the following wireless networking standards use a frequency of 5 GHz and supports transmission speeds up to 1.3 Gbps? |
802.11ac |
The 802.11ac wireless networking standard provides increased bandwidth and communication speeds by using which of the following technologies? |
Channel bonding to combine more channels in the 5 GHz band to allow for up to 160 MHz wide channels MU-MIMO to allow multiple users to use the same channel |